The BODO Ltd Bio-Sparge IBC is simple to
operate, uses water pre-mixed with chemicals of neutral PH disinfectant to help
eradicate the challenges that face farms and flocks from day to day visiting
The Bio-Sparge IBC is designed to operate
in locations where there is no mains water, or farm supply water available. The
water supply to the Bio-Sparge is by separate container / reservoir provided by
the farm or site, and needs to contain water and disinfectant pre-mixed to the
The vehicle passing the sensor operates the
Bio-Sparge IBC,this triggers a variable timer which operates the pumps and the
valves for the pre-set time, the solution is pumped through the pipework and
jets to help disinfect the vehicles.
For this system you will need a 240v supply and a clean bulk storage container to hold your water/chemical mix, we recommend an IBC (Intermediate bulk container). With your system you will get a self-contained sealed unit that is insulated and heated for frost protection, bracketry to mount straight onto your IBC with no hassle and all the necessary components to get your system up and running.
On the Bio-sparge IBC you can extend the roadway from the standard 3.6m up to the 6.0m mark, this system will spray entering and exiting vehicles (SMB 160/120 you have the option to switch from, entry only, exit only or both ways.)
Prices: starting from £3565.00 (Standard 3.6m width).
WHAT YOU WILL NEED FOR THE BIO-SPARGE IBC – SERVICES REQUIRED
230v 50Hz, 13A, Single Phase
A qualified electrician should undertake
the electrical installation. All electrical components are CE Marked and the
Control Cabinet wired to EN60204-1.
Note: We recommend that an RCD is fitted to
the Electrical supply to the Bio-Sparge SMB. General use: 30mA – 20
millisecond, Equine, Racehorse installations: 30mA – 5 millisecond.
We recommend an IBC (Intermediate bulk
container) which has the capacity of 1000 ltrs of water/chemical mix, supplied
CHEMICAL / DETERGENT
It is recommended that a biodegradable PH
neutral Chemical / Disinfectant is used with the Bio-Sparge SMB.
Consult with your chemical supplier and
ensure that the chemicals used comply with all regulations and local bylaws.
The system needs to be mounted on a
concrete base with all of its counter parts (sensor posts, spray bars, main unit
is a link to a birdseye view groundworks drawing and a 3d version. note the 3d
version is the typical layout for a soakaway.